Sony PetaSite CSM-200B Installation Manual page 114

For Proliant DL360 G7
Keyboard Mouse
Setup Procedure
1. RAID setup
(1) Turn on the power switch of the PCU main unit.
(2) Press the F8 key to continue when the "Press < F8 > to run the Option ROM Configuration for Arrays
Utility" message appears.
(3) Select "Create Logical Drive" from the main menu.
(4) Select "[X] RAID1 (1 + 0)" from "Raid Configurations". When the "There are no available physical
drives" message appears, proceed to step (7).
(5) Select "Save the Configuration" by pressing the F8 key.
(6) Continue by pressing the Enter key when the "Configured Saved" message appears.
(7) Select "View Logical Drive" from the main menu.
(8) Check that "Logical Drive", "RAID 1 + 0", "OK" are displayed.
(9) Return to the main menu by pressing the ESC key.
(10) Exit the "Option ROM Configuration for Arrays Utility" by pressing the ESC key again.
4-96
Network cable
Ethernet hub
USB extension
cable
Keyboard cable
Mouse cable
Monitor
Power
cord
Primary AC power source
Monitor extension
cable
Monitor cable
CSM-200