Table of Contents
Advertisement
(2) Insert the drive unit while aligning the drive unit with the guide, and install the drive unit using
the screw removed in step (1).
n
Insert the drive unit gently to avoid shock to the drive and connector portions. Connect the
connector of the drive to that of the main unit while aligning them with each other. Before
tightening the screws, confirm that the drive unit is not floating on the drive stage. If a floating is
found, push the drive unit downward to eliminate the floating, then fix it by tightening the
screws.
Drive stage
PWH4 x 8
Drive unit
4-93
CSM-200
Advertisement
Table of Contents
