Table of Contents
Advertisement
4-2-2. Removing the Shipping Metal Fixture
The transfer assembly and the carrier assembly are fixed inside the basic storage system by the shipping
metal fixtures to avoid damage during transportation. This section describes the procedure of removing
these shipping metal fixtures.
If you are going to install the Basic storage system and the extension console at the same time, remove
the shipping metal fixture after connection of the extension console is complete.
n
Be sure to store the removed shipping metal fixtures for future shipment and maintenance such as parts
replacement.
After removing Shipping (C), do not reinstall the four hexagon socket bolts that had been securing
Shipping (C) to the original positions. Doing so would cause the Y-axis operation problem.
Removal procedure
1. X-axis (upper)
Remove the four hexagon socket bolts and remove the shipping (A).
2. X-axis (lower)
Remove the four hexagon socket bolts and remove the shipping (A).
CSM-200
Shipping (A)
Shipping (A)
M4 x 8
M4 x 8
M4 x 8
M4 x 8
4-9
Advertisement
Table of Contents
