Table of Contents
Advertisement
2. Assembling the Drive Unit
Mount the tape drive onto the attachment.
(1) Remove the tape fixing all the harnesses to the attachment.
(2) Remove the three screws and detach the rear bracket from the main unit of the attachment.
(3) Fix the tape drive to the main unit of the attachment, using the supplied four screws (Nylok + B).
Be careful that the harness should not be pinched by the tape driver and the attachment.
(4) Connect the power harness and the communication harness to the tape drive.
CSM-200
Main unit
Rear bracket
Tape drive
Power harness
Communication
harness
4-115
Advertisement
Table of Contents
