Table of Contents
Advertisement
13. Raise the adjuster foot until the casters touch the floor.
Then raise the adjuster foot until the casters are 20 mm
above the top surface of the bottom tray as shown.
20 mm or more
Bottom tray
14. Place the slope in the bottom tray and install it when
moving portion A of the fixing hook in the direction of
the arrow.
Bottom tray
Slope
15. Bring down the console from the bottom tray using the
slope.
CSM-200
Caster
Hexagonal bolt
block
Adjuster foot
Fixing hook
Portion A
n
At least three persons must work together for safety when
bringing down the console from the bottom tray using the
slope.
There may be a height difference between the bottom tray
and the slope, which catches the casters as the console
passes over. Move the console slowly and gently so that it
does not tilt.
3-5
Advertisement
Table of Contents
