Table of Contents
Advertisement
(4) Open the upper front door in the same way as the lower front door.
(5) Install the door fixed plate of the upper front door of the Basic storage system at the position shown
by (*1).
m
. The AC inlet and the power switch are located in the bottom of the Basic storage system and the drive
console. Upon completion of installation, secure the lower door fixed plate in the Release position.
. Secure the door fixed plates in the top of the drive console, in the top and bottom of the cartridge
console, at the lock position so that the front door cannot be opened.
4-4
Front door
Install the door fixed plate here.
A
(*1)
View in the direction of arrow A.
CSM-200
Advertisement
Table of Contents
