Sony PetaSite CSM-200B Installation Manual page 107

11. Installing the hard disk in the PCU
(1) Remove the HDD Blank from the drive bay of the PCU.
(2) While pushing the LOCK buttons on the both side of the HDD Blank in the direction of the
arrow 1, hold the HDD Blank.
(3) Draw the HDD Blank out from the drive bay in the direction of the arrow 2.
(4) Press the EJECT button of HDD. While the EJECT lever is kept open, push the HDD into the
drive bays ID [0] and ID [1] of the PCU.
(5) Close the EJECT levers.
Eject Lever
Eject button
CSM-200
Blank panels
Lock buttons
1
2
1
2
1
1
Blank panels
Eject Lever
4-89