Sony PetaSite CSM-200B Installation Manual page 81

6. Install the monitor, the mouse and the keyboard. Connect them to the PCU using the extension cables
(KM extension cable and the monitor extension cable) supplied with the PCU and packed in the
accessory box.
7. Connect the network cable on the Ethernet hub to the PCU as shown in Fig. 1.
(Connection of the PCU to the Ethernet HUB is also described in "4-2-7. Installing the Hub".)
(Fig. 2 shows an example illustrating the layout of the monitor, the mouse and the keyboard, together
with routing of cables. In the practical installation, route the cable in accordance with the actual
environment.)
n
When installing the PCU at the top of the PC server area, have a margin in cable routing so that the
PCU can be drawn about 100 mm when loading a CD-ROM.
Network cable
Ethernet hub
Monitor extension
cable
Monitor cable
CSM-200
Power cord
KM extension
cable
Keyboard cable
Mouse cable
Monitor Mouse Keyboard
Monitor
Keyboard
Mouse
Primary AC power source
PCU
Fig. 1
Fig. 2
4-63