Info Commands - R&S SMCVB-K167 User Manual

®
R&S SMCVB-K167
Parameters:
<InpSigStuffing>
Manual operation:

6.2.2 Info Commands

[:SOURce<hw>]:BB:DVBS:PACKetlength?
[:SOURce<hw>]:BB:DVBS:USEFul[:RATE]?
[:SOURce<hw>]:BB:DVBS:USEFul[:RATE]:MAX?
[:SOURce<hw>]:BB:DVBS[:INPut]:DATarate?
[:SOURce<hw>]:BB:DVBS:PACKetlength?
Queries the packet length of the external transport stream in bytes.
Return values:
<InpSigPLength>
Usage:
Manual operation:
[:SOURce<hw>]:BB:DVBS:USEFul[:RATE]?
Displays the data rate of the useful data that is present in the transport stream at the
transport stream input interface selected to supply the modulation data. This is a mea-
sured value.
Return values:
<InpSigUsefull>
Usage:
Manual operation:
[:SOURce<hw>]:BB:DVBS:USEFul[:RATE]:MAX?
Displays the transport stream data rate that is derived from the current modulation
parameter settings and is required by the modulator at the input.
User Manual 1179.1058.02 ─ 02
0 | 1 | OFF | ON
*RST: 1
See "Stuffing" on page 15
......................................................................... 48
....................................................................... 48
............................................................... 48
..................................................................... 49
P188 | Invalid | P204
P188|P204
188/208 byte packets specified for serial input and parallel input.
INValid
Packet length does not match the specified length.
*RST: INValid
Query only
See "Packet Length" on page 16
float
Range: 0 to 999999999
Increment: 0.001
*RST: 0
Query only
See " Useful Data Rate"
Remote-Control Commands
Input Signal Commands
on page 17
48