R&S SMCVB-K167 User Manual page 30

®
R&S SMCVB-K167
If you want to use a different data rate, activate "Nullpacket Stuffing". The function
ensures that the data stream is replayed in the same way as it was recorded. The time
references in the tables of the TS stream are also correct during replay.
Remote command:
:TSGen:CONFigure:TSRate
Orig. Data Rate
Displays the calculated original TS data rate.
Remote command:
:TSGen:READ:ORIGtsrate
Packet Length
Requires a *.trp, *.trp_c, *.emc or *.emc_c file loaded into the "TS Player" dia-
log. *.trp files are previously recorded files.
Displays the packet length of the loaded TS player file.
Remote command:
:TSGen:CONFigure:TSPacket
Nullpacket Stuffing
Requires a *.trp, *.trp_c, *.emc or *.emc_c file loaded into the "TS Player" dia-
log. *.trp files are previously recorded files.
Enables or disables nullpacket stuffing.
The output data rate of the TS player equals the original data rate. The equality
ensures that the time references in the tables of the played TS stream are correct dur-
ing replay.
"On"
"Off"
Remote command:
:TSGen:CONFigure:STUFfing
Stop Data
Requires a *.trp, *.trp_c, *.emc or *.emc_c file loaded into the "TS Player" dia-
log. *.trp files are previously recorded files.
Ensures that a standardized TS data stream is always output at the TS output at the
rear of the R&S SMCV100B.
In pause or stop status, the TS generator generates "test packets", which have data
and header parts, that can be configured using the
Remote command:
:TSGen:CONFigure:STOPdata
User Manual 1179.1058.02 ─ 02
on page 62
on page 63
on page 62
Activate stuffing, if you need a higher rate than the original data rate.
Null packets are inserted into the data stream.
To ensure correct time references in the stream tables, activate pro-
gram clock reference correction ("PCR, DTS/PTS > On").
Deactivate stuffing, if you want to use the same data rate as the origi-
nal data rate.
on page 62
on page 61
DVB-S Configuration and Settings
Test TS Packet.
TS Player
30