How To Generate An Internal Ts Signal; Monitoring The Input Signal - R&S SMCVB-K167 User Manual

®
R&S SMCVB-K167
You can further specify the payload of the stuffing data, see "Test Signal > Payload
Test/Stuff."
The R&S SMCV100B is prepared for receiving TS data, that is input at the "User 1"
connector.
Monitor TS data stream properties in the "Info" side tab, see
Monitor an External TS Input

5.1.3 How to Generate an Internal TS Signal

To play a TS file with the "TS Player"
1. Select "Input Signal > Source > TS Player".
The "TS Player" button appears below.
2. Click "TS Player".
The "TS Player" dialog for playing TS data files opens.
3. Click "Play" to play the default file DIVER.trp.
Playing the file requires no option.

5.2 Monitoring the Input Signal

This chapter provides an overview of the different input signals, that the
R&S SMCV100B uses as modulation data.
● How to Monitor External IP Input
● How to Monitor an External TS Input
● How to Monitor an Internal TS Player
User Manual 1179.1058.02 ─ 02
Performing DVB-S / DVB-S2 Signal Generation Tasks
Signal", on page 42.
Data....................................................................42
Signal........................................................... 42
Signal.......................................................... 43
Monitoring the Input Signal
Chapter 5.2.2, "How to
41