R&S SMCVB-K167 User Manual page 20

®
R&S SMCVB-K167
Table 4-1: IP channel configuration support in broadcast standards
Baseband standard
"ATSC/ATSC-M/H"
"ATSC 3.0"
"DTMB"
"DVB-T"
"DVB-T2"
"ISDB-T"
See also:
●
Chapter 5.1.1, "How to Apply an External IP Input
●
Chapter 4.7, "Local IP Data Network
Requirements
At your IP source, set the "transport stream packets per internet protocol packet" (TP
per IP) parameter as follows:
●
If TP packet length = 188 bytes: Set TP per IP to 7 or 6.
●
If TP packet length = 204/208 bytes: Set TP per IP to 6.
We recommend that youFurthermore, we recommend that you use a separate LAN
infrastructure to stream the transport streams via IP to the IP connector of the base-
band board. We recommend that you avoid TS packet losses during IP transmission.
Settings:
Input
Alias.............................................................................................................................. 20
Type.............................................................................................................................. 21
Multicast
Port................................................................................................................................21
IGMPv3 Source
Ping Source
Ping
Local IP Data
Input IP
Activates/deactivates the IP input.
Remote command:
[:SOURce<hw>]:BB:INPut:IP<ch>[:STATe]
Alias
Sets a unique name for the IP connection.
The definition of a name is optional but facilitates identification in the measurement
views. The name input fits maximum 16 characters in ASCII format.
User Manual 1179.1058.02 ─ 02
"IP Channel x"
Yes
No
Yes
Yes
Yes
Yes
IP..........................................................................................................................20
Address..........................................................................................................21
Address...............................................................................................21
Address.................................................................................................... 21
Result....................................................................................................................21
Network.................................................................................................. 22
DVB-S Configuration and Settings
Baseband standard
"T-DMB/DAB"
"DVB-S"
"DVB-S2"
"DRM"
"Audio AM"
"Audio FM"
Signal", on page 37
Settings", on page 34
on page 52
Input Signal Settings
"IP Channel x"
Yes
Yes
Yes
No
No
No
20