®
R&S
SMCVB-K167
Remote command:
:TSGen:CONFigure:COMMand<ch>
Stop
Stops the player and returns to the start position.
Remote command:
:TSGen:CONFigure:COMMand<ch>
4.6.2 Player Output
Access:
► Select "TS Player > Player Output".
The tab provides settings necessary to configure the output of the TS player.
Settings:
4.6.2.1
General
The tab provides settings necessary to configure general player output properties.
Data
Orig. Data
Packet
Nullpacket
Stop
Data Rate
Sets the output data rate of the player.
Note: If "Nullpacket Stuffing > Off", we recommend that you set the output data rate
equal to the original data rate.
User Manual 1179.1058.02 ─ 02
Rate...................................................................................................................... 29
Rate............................................................................................................. 30
Length............................................................................................................... 30
Stuffing........................................................................................................ 30
Data...................................................................................................................... 30
DVB-S Configuration and Settings
on page 58
on page 58
TS Player
29