R&S SMCVB-K167 User Manual page 52

®
R&S SMCVB-K167
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:ADDRess
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:PING
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:RESult?
[:SOURce<hw>]:BB:INPut:IP<ch>[:STATe] <Alias>
Activates/deactivates the "IP Channel x" as IP input.
Specify the current IP TS Channel with the command
SOURce1:BB:DigStd:INPut:TSCHannel. DigStd stands for the IP TS Channel in
the corresponding broadcast standard.
Parameters:
<Alias>
Example:
Manual operation:
[:SOURce<hw>]:BB:INPut:IP<ch>:ALIas <Alias>
Specifies an alias, i.e. name for the IP connection.
Parameters:
<Alias>
Example:
Manual operation:
[:SOURce<hw>]:BB:INPut:IP<ch>:PORT <Port>
Sets the port of the input IP data at the "IP Data" connector.
Parameters:
<Port>
Example:
Manual operation:
[:SOURce<hw>]:BB:INPut:IP<ch>:TYPE <Type>
Sets the IP input type.
Parameters:
<Type>
User Manual 1179.1058.02 ─ 02
0 | 1 | OFF | ON
*RST: 0
See Example "Configure IP channel 2 properties"
See "Input IP" on page 20
string
See Example "Configure IP channel 2 properties"
See "Alias" on page 20
integer
Range: 0 to 65535
*RST: 6002
See Example "Configure IP channel 2 properties"
See "Port" on page 21
UNIcast | MULTicast
UNIcast
Analyzes all unicast IP packets that arrive at the specified port.
See
[:SOURce<hw>]:BB:INPut:IP<ch>:PORT
Remote-Control Commands
Input Signal Commands
..............................................53
.................................................... 53
................................................ 53
on page 51.
on page 51.
on page 51.
on page 52.
52