Coding Commands - R&S SMCVB-K167 User Manual

®
R&S SMCVB-K167
See
Return values:
<PingResult>
Example:
Usage:
Manual operation:

6.3 Coding Commands

[:SOURce<hw>]:BB:DVBS:CONStel
[:SOURce<hw>]:BB:DVBS:RATE
[:SOURce<hw>]:BB:DVBS:ROLLoff
[:SOURce<hw>]:BB:DVBS:SYMBols
[:SOURce<hw>]:BB:DVBS:CONStel <Constel>
Defines the constellation.
Parameters:
<Constel>
Manual operation:
[:SOURce<hw>]:BB:DVBS:RATE <CodeRate>
Defines the code rate. The available code rates depend on the value of
SOURce<hw>]:BB:DVBS:CONStel.
Parameters:
<CodeRate>
Manual operation:
[:SOURce<hw>]:BB:DVBS:ROLLoff <RollOff>
Sets the roll-off alpha factor value.
User Manual 1179.1058.02 ─ 02
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:PING
string
Returns ping messages.
See
Query only
See
S4 | S8 | S16
S4
QPSK
S8
8PSK
S16
16QAM
*RST:
See
R1_2 | R2_3 | R3_4 | R5_6 | R7_8 | R8_9
*RST:
See
Example "Configure IP channel 2 properties"
"Ping Result" on page 21
.................................................................................. 54
.......................................................................................54
................................................................................... 54
..................................................................................55
S4
" Constellation" on page 22
R3_4
" Code Rate" on page 23
Remote-Control Commands
Coding Commands
on page 53.
on page 51.
[:
54