Global Connector Settings; Ts Player - R&S SMCVB-K167 User Manual

®
R&S SMCVB-K167
If "Packet Length" = 188: 16 dummy bytes are transmitted instead of the 16 Reed-
Solomon bytes. The data rate is not changed.
If "Packet Length" = 204: All 204 bytes of an MPEG frame are transmitted
unchanged. The data rate is not changed.
Remote command:
[:SOURce<hw>]:BB:DVBS[:SPECial]:REEDsolomon

4.5 Global Connector Settings

The "Input Signal" dialog, the "Trigger/Marker/Clock" dialog and "Trigger In", "Marker"
and "Clock" tabs in "Baseband > ARB/Custom Digital Mod" configuration dialogs pro-
vide quick access to the related connector settings. Click the "Global Connectors" but-
ton to access the settings.
See also chapter "Global Connector Settings" in the user manual.

4.6 TS Player

To access the functionality
1. Select "Baseband > DVB-S > Input Signal".
2. Select "Source > TS Player".
3. Select "TS Player" button.
Opens the TS player dialog, where you can load files.
Required options
●
Enable Broadcast Standards option (R&S SMCVB-K519)
●
Optional Stream library option (R&S SMCVB-KS10 to R&S SMCVB-KS20)
Support in broadcast standard configuration
Baseband standard
"ATSC/ATSC-M/H"
"ATSC 3.0"
"DTMB"
"DVB-T"
User Manual 1179.1058.02 ─ 02
"Source > TS Player"
Yes
Yes
Yes
Yes
DVB-S Configuration and Settings
on page 55
Baseband standard "Source > TS Player"
"T-DMB/DAB" Yes
"DVB-S" Yes
"DVB-S2" Yes
"DRM" No

TS Player

25