R&S SMCVB-K167 User Manual page 47

®
R&S SMCVB-K167
[:SOURce<hw>]:BB:DVBS:SOURce <InpSigSource>
Parameters:
<InpSigSource>
Manual operation:
[:SOURce<hw>]:BB:DVBS:INPut <InpSigInput>
Sets the external input.
Parameters:
<InpSigInput>
Manual operation:
[:SOURce<hw>]:BB:DVBS:INPut:FORMat <InpSigFormat>
Sets the format of the "TS IN" input signal.
Parameters:
<InpSigFormat>
Manual operation:
[:SOURce<hw>]:BB:DVBS:INPut:TSCHannel <InpSigTSChannel>
Selects the IP-based transport stream (TS) channel. You can select 1 out of 4 IP TS
channels as input at the "IP Data" interface.
To configure a particular channel, see
on page 19.
For configuring IP channel settings and local IP data network parameters, see:
●
Chapter 6.2.4, "IP
●
Chapter 6.6, "BCIP
Parameters:
<InpSigTSChannel> 1 | 2 | 3 | 4
Manual operation:
[:SOURce<hw>]:BB:DVBS:STUFfing <InpSigStuffing>
Activates stuffing.
User Manual 1179.1058.02 ─ 02
EXTernal | TSPLayer | TESTsignal
*RST: EXTernal
See "Source" on page 13
TS | IP
*RST: TS
See " Input" on page 14
ASI | SMPTE
*RST: ASI
See "Input Format" on page 14
Chapter 4.2.4, "IP Channnel x
Subsystem", on page 51
Subsystem", on page 63
*RST: 1
See "IP TS Channel" on page 14
Remote-Control Commands
Input Signal Commands
Settings",
47