Tsgen:configure:command<Ch; Tsgen:configure:payload; Tsgen:configure:pid - R&S SMCVB-K167 User Manual

®
R&S SMCVB-K167
:TSGen:CONFigure:TSPacket
:TSGen:CONFigure:TSRate
:TSGen:READ:FMEMory
:TSGen:READ:ORIGtsrate
:TSGen:READ:PLAYfile:LENGth?
:TSGen:CONFigure:COMMand<ch>
Triggers playing, pausing and stopping of the TS player file selected with
CONFigure:PLAYfile.
Setting parameters:
<PlayerStatus>
Example:
Usage:
Manual operation:
:TSGen:CONFigure:PAYLoad <PayLoad>
Determines the payload of the test packet. Also influences the payload of the gener-
ated stuffing packets while the TS player is running.
Parameters:
<PayLoad>
Example:
Manual operation:
:TSGen:CONFigure:PID <PID>
The available values depend on the settings of :TSGen:CONFigure:PIDTestpack.
If
:TSGen:CONFigure:PIDTestpack
then :TSGen:CONFigure:PID is 1FFF(hex).
Otherwise the values are variable.
Parameters:
<PID>
Example:
Manual operation:
User Manual 1179.1058.02 ─ 02
...........................................................................................62
.............................................................................................. 62
.................................................................................................. 62
................................................................................................63
......................................................................................63
STOP | PLAY | PAUSe
*RST: STOP
See Example "Play a TS player file"
Event
See "Play" on page 28
HFF | H00 | PRBS
*RST: PRBS
See Example "Configure and monitor TS player output"
on page 57.
See "Payload Test/Stuff"
is set to NULL,
integer
Range: 0 to 8191
*RST: 8191
See Example "Configure and monitor TS player output"
on page 57.
See "PID (Hex)" on page 32
Remote-Control Commands
TSGen Subsystem
on page 56.
on page 32
:TSGen:
58