Ip Subsystem - R&S SMCVB-K167 User Manual

®
R&S SMCVB-K167

6.2.4 IP Subsystem

The SOURce:BB:INPut:IP subsystem contains the commands for configuring input
IP data from a local IP data network.
To configure local IP data network parameters, see
on page 63.
Common suffixes
The following common suffixes are used in the SOURce:BB:INPut:IP remote com-
mands:
Suffix
IP<ch>
Example: Configure IP channel 2 properties
// Use the data from IP channel 2 as input for modulation data.
SOURce1:BB:INPut:IP2:STATe ON
// Specify alias as "Alias 2".
SOURce1:BB:INPut:IP2:ALIas "Alias 2"
//******************************************************************************
// Define Unicast properties.
//******************************************************************************
SOURce1:BB:INPut:IP2:TYPe UNI
// Local IP data interface is configured for Unicast reception
SOURce1:BB:INPut:IP2:PORT 6002
//******************************************************************************
// Define Multicast properties.
//******************************************************************************
SOURce1:BB:INPut:IP2:TYPe MULT
// Local IP data interface is configured for Multicast reception
SOURce1:BB:INPut:IP2:MULTicast:ADDRess?
// Response: "226.0.0.0"
SOURce1:BB:INPut:IP2:IGMP:SOURce:ADDRess?
// Response: "0.0.0.0"
SOURce1:BB:INPut:IP2:IGMP:SOURce:ADDRess "192.168.10.1"
SOURce1:BB:INPut:IP2:IGMP:SOURce:PING
SOURce1:BB:INPut:IP2:IGMP:SOURce:RESult?
// Response: "Ping: Successful"
Commands
[:SOURce<hw>]:BB:INPut:IP<ch>[:STATe]
[:SOURce<hw>]:BB:INPut:IP<ch>:ALIas
[:SOURce<hw>]:BB:INPut:IP<ch>:PORT
[:SOURce<hw>]:BB:INPut:IP<ch>:TYPE
[:SOURce<hw>]:BB:INPut:IP<ch>:MULticast:ADDRess
User Manual 1179.1058.02 ─ 02
Value range Description
1 to 4 IP channel number
..........................................................................52
............................................................................ 52
............................................................................52
............................................................................ 52
Remote-Control Commands
Input Signal Commands
Chapter 6.6, "BCIP Subsystem",
....................................................... 53
51