Test Signal Commands - R&S SMCVB-K167 User Manual

®
R&S SMCVB-K167
For "Stuffing > On", the value indicates the maximum useful data rate (payload) that is
allowed in the transport stream.
Return values:
<InpSigMaxRate>
Usage:
Manual operation:
[:SOURce<hw>]:BB:DVBS[:INPut]:DATarate?
Displays the current data rate of the external transport stream applied at the transport
stream input interface (useful data rate + "null packets").
Return values:
<InpSigDatarate>
Usage:
Manual operation:

6.2.3 Test Signal Commands

[:SOURce<hw>]:BB:DVBS:TESTsignal
[:SOURce<hw>]:BB:DVBS:TSPacket
[:SOURce<hw>]:BB:DVBS:PAYLoad
[:SOURce<hw>]:BB:DVBS:PID
[:SOURce<hw>]:BB:DVBS:PIDTestpack
[:SOURce<hw>]:BB:DVBS:PRBS
[:SOURce<hw>]:BB:DVBS:TESTsignal <InpSigTestSig>
Parameters:
<InpSigTestSig>
Manual operation:
[:SOURce<hw>]:BB:DVBS:TSPacket <SetTSPacket>
Specifies the structure of the test transport stream packet that is fed to the modulator.
User Manual 1179.1058.02 ─ 02
float
Range: 0 to 999999999
Increment: 0.000001
*RST: 0
Query only
See "Max. Useful Data Rate"
float
Range: 0 to 999999999
Increment: 0.001
*RST: 0
Query only
See " Measured Data Rate"
...............................................................................49
................................................................................. 49
..................................................................................50
..........................................................................................50
.............................................................................50
...................................................................................... 50
TTSP | PBEC
*RST: TTSP
See "Test Signal" on page 15
Remote-Control Commands
Input Signal Commands
on page 16
on page 17
49