R&S SMCVB-K167 User Manual page 53

®
R&S SMCVB-K167
Example:
Manual operation:
[:SOURce<hw>]:BB:INPut:IP<ch>:MULticast:ADDRess
Sets the destination IP address (IPv4) of the IP connection.
Parameters:
<Address>
Example:
Manual operation:
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:ADDRess
Specifies the IGMP source address of the network.
Parameters:
<Address>
Example:
Manual operation:
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:PING
Triggers pinging of the IGMP source address in the local IP data network. Query the
result via
on page 53.
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:RESult?
Queries the result of pinging the
User Manual 1179.1058.02 ─ 02
MULTicast
When an IP address is in the multicast address range, an
attempt is made to join a multicast group using IGMP. Set multi-
cast address and port.
See:
[:SOURce<hw>]:BB:INPut:IP<ch>:MULticast:ADDRess
on page 53
[:SOURce<hw>]:BB:INPut:IP<ch>:PORT
*RST:
See Example "Configure IP channel 2 properties"
See "Type"
string
Range:
See Example "Configure IP channel 2 properties"
See "Multicast Address"
string
See Example "Configure IP channel 2 properties"
See "IGMPv3 Source Address"
[:SOURce<hw>]:BB:INPut:IP<ch>:IGMP[:SOURce]:RESult?
See Example "Configure IP channel 2 properties"
Event
See "Ping Source Address"
UNIcast
on page 21
224.0.0.0 to 239.255.255.255
on page 21
on page 21
on page 21
IGMP source address.
Remote-Control Commands
Input Signal Commands
on page 52
on page 51.
on page 51.
on page 51.
on page 51.
53