®
R&S
SMCVB-K167
Protocol
Sets the protocol type of the input IP data.
The current firmware supports
Remote command:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:PROTocol
Subnet Mask
Displays the bit group of the subnet in the host identifier.
To assign the subnet mask manually, select "Address Mode > Static".
Remote command:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:SUBNet:MASK
on page 65
Show Connector
Accesses a dialog that displays the physical location of the selected connector on the
front/rear panel of the instrument.
MAC Address
Displays the MAC address, a unique identifier of the network adapter in the
R&S SMCV100B.
Remote command:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:MACaddress
User Manual 1179.1058.02 ─ 02
DVB-S Configuration and Settings
UDP
and UDP/RTP.
Local IP Data Network Settings
on page 66
on page 65
36