R&S NRP-Z27/-Z37
SYSTem
With the aid of the SYSTem system, administrative device settings can be defined and queried. This
includes detailed information on the power sensor module and its initialization and the transfer of
available commands and their parameter limits.
Table 6-5
Commands of the SYSTem system
Command
SYSTem
:INFO? [Item]
:INITialize
MINPower?
:TRANsaction
:BEGIN:
:END
SYSTem:INFO? [Item]
SYSTem:INFO? yields a string containing information that is more detailed than the identification string
delivered by the power sensor module as a response to *IDN?. If no Item is specified, the response
string is a sequence of entries in the form Item:Information-String separated by CR and LF (in C
notation: \r\n). With the Item optionally appended to the command, the entry for the required Item can
be queried. The response string is zero-terminated, i.e. its end identification is a zero byte (in C
notation: \0).
Table 6-6
Meaning of Item in the SYSTem:INFO? command
Item
Information string
"MANUFACTURER"
"Rohde & Schwarz GmbH & Co. KG"
"NRP-Z27" for R&S NRP-Z27"
"TYPE"
"NRP-Z37" for R&S NRP-Z37"
"STOCK NUMBER"
"1169.4102.02" for R&S NRP-Z27"
"1169.3206.02" for R&S NRP-Z37"
"SERIAL"
"<serial number>"
"HWVERSION"
"000000000"
"HWVARIANT"
"000000000"
"SW BUILD"
"<build number>"
"TECHNOLOGY"
"Thermal"
1169.3870.12
Parameter
Remote Control - Commands
Unit
W
Remarks
Manufacturer
Type designation
Material number
6-digit serial number
Hardware version (standard)
Hardware model (standard)
Version number of firmware
Detector technology used
6.13
Remarks
Query only
No query
Query only
No query
No query
E-2