Keysight Technologies M9485A Startup Manual page 30

Getting Started
STEP 3. Install the Network Analyzer Modules
Figure 1-24 Cable Connections For High Gain Measurement Configuration with M9378A
Figure 1-25 Cable Connections For High Gain Measurement Configuration with M9378B
f. For Configurable Test Set measurement, correct jumper cable has to be
selected and connected between test ports. Jumper cables for the
Configurable Test Set comes with color coding to ease cable selection.
Figure 1-26 on page 30
Configurable Test Set.
Figure 1-26 Jumper Cable For DRA Measurement
g. As shown in the figure above, the color coding and the connector
number on the jumper cable indicates the measurement it should be
used for and the connection between ports.
h. For example, white for standard measurement, red for high power, blue
for wide dynamic range and yellow for high gain measurement.
1-26 on page
below shows the jumper cable used for
30.
30
Figure