Table of Contents
Advertisement
Getting Started
STEP 3. Install the Network Analyzer Modules
Cable Connection for Standard Receiver M9376A
a. Cable connection among receiver modules and between distributor and
receiver modules defers depending on the settings:
•
•
b. However, cable connection between source, synthesizers, reference and
distributor remain the same for all the 12-port configuration as shown in
Figure 1-14 on page 24
Figure 1-15 on page
c.
Figure 1-16 on page 25
standard modules for 12-port configuration in 1 chassis.
d.
Figure 1-17 on page 26
standard modules for 24-port configuration in 2 chassis.
page 26
module configuration.
Figure 1-14 Cable Connections Between Source, Synthesizers, Reference and Distributor
for 12-port Configuration
12-port or 24-port configuration
Standard Receiver (M9376A) or Configurable Test Set (M9377A and
M9378A/B)
and for all 24-port configuration, as shown in
25, regardless of the receiver modules settings.
shows the complete cable connections between
shows the complete cable connections between
shows the required cables to make the connections in standard
24
Table 1-7 on
Advertisement
Table of Contents
