Table of Contents
Advertisement
Getting Started
STEP 3. Install the Network Analyzer Modules
i. Connect the cables according to connector number as shown in
1-27 on page
These are connections for both situations, where coupler M9378A/B is to
the left side of the M9377A (side A) and where M9378A/B is on the right
side of the M9377A (side B).
Figure 1-27 Jumper Cable Connection Direct Receiver Access Measurement with M9378A
31and
Figure 1-28 on page 32
31
Figure
for M9378A and M9378B.
Advertisement
Table of Contents
