Keysight Technologies M9485A Startup Manual page 27

Getting Started
STEP 3. Install the Network Analyzer Modules
No Cable Part Numbers
11 M9485-61611
12 M9485-61612
13 M9485-61613
14 M9485-61614
15 M9485-61615
16 M9485-61616
17 M9485-61617
18 M9485-61618
19 M9485-61619
21 M9485-61633 (For system rack)
M9485-61621 (For 2 tier chassis)
22 M9485-61622
23 M9485-61634 (For system rack)
M9485-61623 (For 2 tier chassis)
24 M9485-61624
25 M9485-61625
26 M9485-61635 (For system rack)
M9485-61626 (For 2 tier
chassis)**
27 M9485-61627
28 M9485-61628
29 M9485-61629
* A SMB-SMA adapter is required to connect this cables with M9340A.
Attach the SMB-SMA adapter to the M9340A before installing into the
chassis.
** When the system rack is used, 1U space should be placed between
Chassis 1 and 2. In such cases M9485-61633, M9485-61634 and
M9485-61635 are used instead.
Cable Connection for Configurable Test Set, M9377A & M9378A/B
a. With the Configurable Test Set, the cable connection within the Direct
Access Receiver and Directional Coupler modules defers depending on
the test purpose:
• Standard
• High Power measurement
Cable Type
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
Semi rigid
27
Required Tool to Place the
Cable
Socket and torque driver (to
be used with socket
adapter), set to 8 in-lb (not
supplied)