Dismounting Machine From Tractor; Mounting And Adjustments; Installing Tines - SaMASZ TANGO 730 Operator's Manual

5.12. Dismounting machine from tractor

CAUTION:
When dismounting, make sure there is no person in between the machine
and the tractor.
To dismount the machine from the tractor:
Set the machine onto an even, stable ground,

Turn the tractor's ignition off and take the key out,

Secure the machine against moving by placing wedges at wheels,

Fold out the support leg and protect with safety pin,

Disconnect the machine's hydraulics and electrics from the tractor,

Disconnect control panel,

Dismount the telescopic articulated shaft and place it on the shaft holder, which is standard-

delivered with the machine,
Detach the machine from the tractor.


6. MOUNTING AND ADJUSTMENTS

6.1. Installing tines

Tines should be installed according to scheme provided in Fig. 33.
WARNING!
- Use only tines recommended by manufacturer.
- Before each operation check condition of tines and holders. Worn or
damaged tines should be replaced immediately.
IMPORTANT:
Before changing the tine check direction of rotor turns.
Instruction manual
Fig. 33. Installing raking tines
- 27 -
Two rotor rake
TANGO