Protection Mechanism Of Front Safety Curtain; Lifting Rake On Headlands And Transport Position - SaMASZ TANGO 730 Operator's Manual

Two-rotor rake

Hide thumbs Also See for TANGO 730:

Table of Contents

5.9. Protection mechanism of front safety curtain

The mechanism is designed to provide protection of front safety curtain against damage in the

event the curtain was not locked in the upper position by shut-off valve, and the rotating working

units will be slid down.

This mechanism is operated by means of lever (1), which, as the working unit approaches the

rake's linkage, is pushed away by pin (4) located on pull-out arm. The lever has a line (2) attached,

and with its use, along with the lever, push-off arm (3) operates. It is intended to protect the curtain

against damage by pushing it to a safe distance away from an operating rotor. With adjusting nut (5)

it is possible to set a safe distance for safety curtain from raking arms of the working unit.

To lift working units to transport position, on the control panel switch to lifting function (2),

and then in the initial stage of lifting the working units, pull the pawl (P) by means of string (4) and

using tractor's hydraulic valve lever set the pressure (Fig. 31).

To lift working units on headlands, on the control panel switch to lifting function (1) and using

tractor's hydraulic valve lever set the pressure. When lifting arms with working assemblies the pawl

(P) will be locked automatically in position for headlands (Fig. 32).

Instruction manual

Fig. 29. Rear working unit lowering control valve (Z

Fig. 30. Protection mechanism of front safety curtain

- 25 -

Two rotor rake

TANGO

)

Table of Contents