10. RAKE REPAIR AND WITHDRAWAL FROM USE
10.1. Repair
REMEMBER:
Before repair works make sure the rake is disconnected from the
Before repairing or assessing whether the rake is still serviceable, it should be carefully
cleaned of dirt, mud and plant remains.
After checking nuts and bolts, proper slack in joints and gears we can assess if the machine is
still serviceable. Worn out bolts, pegs, pins, discs, holders, tines etc. should be replaced.
The following operations are to be made once the machine is repaired:
make sure that all elements are installed properly,
install the dismounted guards,
check whether screws and nuts are tightened,
once all the guards are installed, perform a warm-up start in order to make sure the repaired
machine operates properly.
10.2. Disassembly and withdrawal from use
If the rake cannot be repaired anymore, it should be withdrawn from use. Therefore oil from
the frame gearbox should be drained and thoroughly clean any excess oil with cleaning agent, take
parts made of plastic off. They should be used further on or delivered to a proper waste treatment
company. Upon completing the required activities the rake should be sold to breaker's yard.
IMPORTANT:
When dismounting the machine pay particular attention to and additional
dangers, as crushing, cutting, wounding, concussion. Use proper tools and
personal protective equipment: protective gloves, clothing and footwear, eye
wear, etc. Pay attention so that the machine works efficiently, and thus it is
required to secure the machine with supports.
11. WARRANTY CARD
The product quality has been checked and meets the required standards and regulations and
is permitted for use.
NOTE:
Warranty card – if not filled in, corrected or illegible – is not valid.
Instruction manual
ROTARY RAKE
- 35 -
Two rotor rake
TANGO
tractor.
Serial number
Date of
manufacture
Manufacturer
Date of purchase
Dealer stamp
Dealer signature