Removing Clogging And Jams - SaMASZ TANGO 730 Operator's Manual

(1)
Sequential
lifting
CAUTION:
When preparing the rake for position for headlands, there is a risk of tilting
and falling of the aggregate, thus this should be carried out on an even
ground.
When turning back, reduce the driving speed accordingly!

5.11. Removing clogging and jams

When operating the mower pay attention to variable conditions in Field, which may influence
the mower clogging and blocking, such as: terrain unevenness, height and density of grass as well
as other objects in the grass (stones, branches, piles of soil). In order to avoid clogging and
blocking, operating speed should be adjusted to the mentioned conditions.
CAUTION:
Removing clogs and jams while the machine is in operation can lead to the
accident !
In case of machine blockage caused by wrapped material, set the machine on a flat surface,
remove excess material using sharp tool. After clearing the machine check if nothing has been
damaged.
To remove any clogging it is obligatory to disconnect the drive and the motor, take out the
ignition key. When eliminating any clogging on the machine, use also safety means for operator, so
protective gloves and tight wear.
Instruction manual
(2)
Folding-
unfolding of
working
units
Fig. 31. Preparing rake for headlands and transport position
Fig. 32. Rake in position for headlands
P
- 26 -
Two rotor rake
TANGO
4