Removing Clogging And Jams - SaMASZ Z2-780 Operator's Manual

a)
Fig. 27. Lock (P) blocked when taking turns over swaths a) Z2-780, b) Z2-840
CAUTION:
When preparing the rake for position for headlands, there is a risk of tilting
and falling of the aggregate, thus this should be carried out on an even
ground.
When turning back, reduce the driving speed accordingly!

5.8. Removing clogging and jams

When operating the mower pay attention to variable conditions on field, which may influence
the mower clogging and jams, such as: terrain unevenness, height and density of grass as well as
other objects in the grass (stones, branches, piles of soil). In order to avoid clogging and jams,
operating speed should be adjusted to the mentioned conditions.
CAUTION:
Removing clogs and jams while the machine is in operation can lead to the
accident !
In case of machine blockage caused by wrapped material, set the machine on a flat surface,
remove excess material using sharp tool. After clearing the machine check if nothing has been
damaged.
To remove any clogging it is obligatory to disconnect the drive and the motor, take out the
ignition key. When eliminating any clogging on the machine, use also safety means for operator, so
protective gloves and tight wear.
Operator's manual
Fig. 26. Taking turns over swaths
4 P
- 24 -
Double – sided rotary rake
Z2-780 (H); Z2-840 (H)
P
4
b)