Removing Clogging And Jams - SaMASZ DUO 740 Operator's Manual

NOTE:
To avoid a potential falling of the machine reduce its lifting height on tight turns or increase
turning radius.
WARNING:
The machine may fall when operating on a slope (Fig. 37).
Fig. 37. Risk of machine falling due to torque M when operating on a slope

5.11. Removing clogging and jams

When operating the mower pay attention to variable conditions on field, which may influence
the mower clogging and jams, such as: terrain unevenness, height and density of grass as well as
other objects in the grass (stones, branches, piles of soil). In order to avoid clogging and jams,
operating speed should be adjusted to the mentioned conditions.
In case of machine blockage caused by wrapped material, set the machine on a flat surface,
remove excess material using sharp tool. After clearing the machine check if nothing has been
damaged.
To remove any clogging it is obligatory to disconnect the drive and the motor, take out the
ignition key. When eliminating any clogging on the machine, use also safety means for operator, so
protective gloves and tight wear.
NOTE!
Removing clogs and jams while the machine is in operation can lead to the
accident!
Operator's manual
M
F
- 31 -
Two-rotor in-line rake
DUO 680
DUO 740