Embroider Along Design Border - DAHAO BECS-285A Owner's Manual

Click
Click to cancel the operation.
Outline Check:
(1) Click the key of "Outline Check".
(2) System will ask users to confirm.
System will generate a temporary data according to the boundary design data and ask user
to confirm. Click
Press " " to confirm and then system will return to the main screen.
Now system displays
system returns to the embroidery preparing status.
Frame work modes:
Click
(only available for certain machine types)
Frame work modes include: Hat Mode, Big Frame Mode, Clothing Mode.

9.6 Embroider along Design Border

The function enables system to calculate the design's peripheral data and generate the
temporary data for embroidery. This function should be used at embroidery preparation status.
1. Click
2. Click "Emb along Design Border".
3. System will ask users to confirm operation.
86
Chapter 9 Assistant Operation
to confirm and the system will move the frame along the design border.
to cancel the operation.
on the main screen. Pull bar to embroider border, after that,
to shift the frame work mode and improve the embroidery quality
to have access to the Assistant Operation interface.
Owner's Manual of BECS- 285A Computerized Control System