DAHAO BECS-285A Owner's Manual page 25

No. Display
4
Owner's Manual of BECS- 285A Computerized Control System
Chapter 2 Embroidery Guide
Name
Click it to enter the parameter
setup interface which includes
color-changing order and the
normal parameters like scaling
Parameter Setting
down/up and repetition, as well
as the general parameters like,
sewing
application
machine parameters.
Back to Origin
Back to Stop Point
Assistant Operation Click it to have access to
Assistant Operation
Management interface, where
includes the assistant operations
during or before the embroidery,
such as save/restore origin, set
offset point, border operation,
located idling, clearance of
accumulated stitch number,
clearance of X/Y travel amount.
After click it, the system will
have
Function interface, where user
can perform the operations, such
Other Functions
as statistic inquiry, frame origin
setting, power-off recovery, soft
limit
authorization
touching panel correction, time
management and so on.
Description
machine is set at auto start, the
machine will begin
embroidery automatically; if it is
set at the manual start, the user
needs to press the start key for
embroidery.
parameters,
parameters
After the machine stops, user
can click this key to have the
frame automatically return to the
origin of the current design.
After the machine stops, user
can click Manual Frame-moving
key to move the frame (like
appliqué). Then user can click
this key to have the frame return
to the stop point of current
design.
access to the
setting,
management,
Reference Page
the
Chapter 4
machine
and
Chapter 2.4
Chapter 2.4
Chapter 9
Other
Chapter 10
machine
15