Table of Contents
Advertisement
No.
Display
1
2
Owner's Manual of BECS- 285A Computerized Control System
Chapter 2 Embroidery Guide
Name
Current
Needle
Position
Current
Color-changing
Times
Color-changing
Order
High-speed Manual
Frame-moving
Status
Low-speed Manual
Frame-moving
Status
The
main
shaft
stops at the right
position (100°).
The
main
shaft
doesn't stop at the
right
position
(100°).
The main shaft runs
well.
Assistant Operation
Status
Description
This figure is for the actual
needle position at present. 0 is for
the invalid needle position.
The initial value of it is 1. After
the embroidery starts, this value
will add 1 at each finish of
successful color-changing.
This order is the sequence of the
needle rods for changing color.
The 3D figure is for the current
needle position.
When the machine stops, press
the manual frame-moving keys to
move the frame, and the frame
will move in the high speed.
Switch between
can be activated by the switching
key on the panel.
Different from the High-speed
Manual Frame-moving Status, it
is used for manual adjustment of
the frame position.
When the machine stops, the
main shaft stops at the right
position. At this moment, user
can
perform
operations
color-changing
frame-moving.
When the machine stops and the
main shaft doesn't reach the right
position, user will need to turn
the shaft to the 100° position
manually by clicking
The main shaft runs normally at
embroidery.
Click
to have access to
Assistant Operation Management
interface and select any one of
the embroideries, such as design
border, line, cross and design
outline. No matter which is
Reference Page
and
like
and
.
9
Hide quick links:
Advertisement
Table of Contents
