DAHAO BECS-285A Owner's Manual page 28

saved. Move frame to start point right now?" will appear when entering the main interface.
Click
III. Assistant Operation
After choosing the design, the user will enter the main interface, and he can do the needed
assistant operations before embroidery.
Set repetition, rotation and scaling — — click
1.
management interface.
Set the color-changing order —— click
2.
color-changing interface.
Set appliqué —— click
3.
Click Other Operation to set the appliqué of design.
4. For border inquiry, brooder idling. embroider standard line, embroider cross,
embroider line, embroider outline of design, user can click
Functions. Click
Locate the design for embroidery at the center of frame. —— Click
5.
access to Other Functions. Click
Attention: This function is to locate the soft limit to the center of the frame.
Save Start Point of Design —— Click
6.
further operations. Click
user should set the frame origin before using the function for saving and restoring the start
point of design.
18
Chapter 2 Embroidery Guide
and the frame will automatically return to the start point.
to have access to the Design Management interface.
to have access to Assistant Operation interface
to have access to the Assistant Operation interface.
to have access to the Assistant Operation interface. Attention:
, the system will have access to the
to have access to Other Function for the
Owner's Manual of BECS- 285A Computerized Control System
to enter the parameters
to have access to Other
to have