DAHAO BECS-285A Owner's Manual page 88

direction. "Center": Move the design to the original position.
"Center":
checking.
"Reduce": Reduce to show the window of letter design.
"Enlarge": Enlarge to show the detailed part of the letter design.
"Actual": Show the letter design in the actual size. At this time, the size of design
in interface is equal to actual size.
"Save": It is used for saving the edited letter design. After clicking that key, the
system will show the window where user can input the design number design name. According
to need, change the design name and design number (the serial number are not recommended
for modification generally), then click confirmation to start saving.
"Exit": Quit from "Create Letter Design".
"Help": Help for "Adjust Letter Design" interface.
3. Keys for Adjusting the Parameter for Whole Arrangement
If you adjust the parameters for whole rank after the edition of the individual letter, the
edition of the individual letter will be probably replaced. There are 4 arrangement modes.
"Horizontal": Rank the letters horizontally
"Vertical": Rank letters vertically
"Up Arc": Rank letters in arc bending upwards
"Down Arc": Rank letters in arc bending downwards
"Fix Letter Direction": When user ranks the letters in arc, the letter angle will not
78
Chapter 8 Letter Design Operation
Scale up/down the diagram, so as to show the whole design for
Owner's Manual of BECS- 285A Computerized Control System
.
.
.
.