DAHAO BECS-285A Owner's Manual page 72

Chapter 6 Memory Design Management
The combined ID shows the current design number and how many designs the combined
design is composed of. Display form is "design number (the total amount of designs)".
5. Set the parameters of the first design, including design number, scaling ratio,
rotating angle, design direction and priority mode. Please read Setting of the Normal
Parameters of Chapter 4
6. Click
change the parameters of combined designs.
If the current design is not the first of the packed design, user needs to set the interval
between it and the first design. Please read input way in Chapter 4 for reference.
7. Click
62
for reference.
to set several designs for packing. And click
to have access to the interface of editing the combined design.
Owner's Manual of BECS- 285A Computerized Control System
to go back to