DAHAO BECS-285A Owner's Manual page 124

Chapter 11 About JF Sequin Embroidery
（1） Move the cursor to a stitch position, then click "Set Range Start Stitch" to set the
current stitch as the start stitch of this area. Move the cursor to a different stitch position,
then click "Set Range End Stitch". The area for setting is from the start stitch to end
stitch.
（2） If you want to cancel the area, click "Cancel Range".
7. Sequin Mode Selection
There are 15 kinds of sequin modes for customers to select, including A, B, AB, C, AC,
BC, ABC, D, AD, BD, ABD, CD, ACD, BCD and ABCD.
Names of these 4 sequins: A, B, C and D. If these 4 sequins are delivered at same time,
then A will be on the top, then B, C and D.
8. Edition of Alternating Sequin
If you want to use the alternating sequin, you should define a range for using them at
first. In " ", use "Set Range Start Stitch" and "Set Range End Stitch" or "Select Current
Color Range" to set sequin range. After that, use "Edit Alternating Sequin" in "
the alternating sequin used.
114 Owner's Manual of BECS- 285A Computerized Control System
" to set