DAHAO BECS-285A Owner's Manual page 179

Set Frame Origin: the frame origin need be set only once under any of the following circumstances: ① Starting using a new machine;
② Replacing the main board; ③ Updating data program;
→【Set Frame Origin】→【Auto Set Frame Origin】→
A. Input Designs
→ →
B. Choose a Design
Use direction keys and page
→
keys to choose a design
E. Frame Select and Position
① Frame Select:
② Frame Position:
F. Embroidery confirmation
Embroidery confirmation→
Releasing the embroidery, if user wants to start a new design. start the operation from step B "Choose a Design" again.
Owner's Manual of BECS- 285A Computerized Control System
Appendix 6 285A Control System Fast Manual
Appendix 6 285A Control System Fast Manual
Chapter 1 Embroidery Operation
→ Use direction keys and page keys to choose a design →
→
→【Frame Select】→
→ Use direction keys:
→
C. Set Normal Parameters
→【Normal Para.】→
, to adjust embroidery position →
, , ,
G. Start Embroidery
→ Start Embroidery
D. Set color changing order
→
H. Embroidery preparation
Embroidery release→
169