DAHAO BECS-285A Owner's Manual page 52

Chapter 4
No Figure
3
4
The design display area displays the designs which are under color-changing setting.
After changing the color-changing order, the display of design will be renewed at same time
which will have the effect after the change shown.
Color-changing order display area shows color block number, needle numbers and
needle colors
Design display can be in parallel with the setting, insertion and deletion of needle
42
Common Parameters and Color-Changing Order
Name
List of Color Block
Sequence Numbers
List of Needle
Sequence Numbers
List of Needle
Colors
Move Upward
Insert a Needle
Number
Delete a Needle
Number
Set Cyclic Needle
Number
Move downward
Confirm
Needle Color
Setting
Interchange
Needles
Cancel
Help
Owner's Manual of BECS- 285A Computerized Control System
Description
Display the sequence numbers of the
color blocks in the design.
Display the needle sequence numbers
corresponding to the color blocks.
Display the thread colors for the color
blocks in the design.
Move upward the color-changing list to
select the color block.
Click this key and a needle number to
insert it in the current list of needle
sequence.
Delete the needle number of the current
operation position in the needle list.
Cyclic setting according to the needle
sequence number list before the current
color block.
Move downward the color-changing list
to select the color block.
Confirm: Save the color-changing setting
and return.
Select in the default color and set the
color of each needle
Open the needle interchanging interface
and set it.
Cancel the color-changing setting of this
time and return.
Display the help menu.