DAHAO BECS-285A Owner's Manual page 30

V. Embroidery Status
1. Stop: Press the Start key to begin the embroidery (Including the low speed idling
and the high speed idling).
Press the Stop key to retreat (Including the low speed idling and the high speed idling).
2. Running: At normal embroidery, hold Start key to lower the speed of embroidery,
release the Start Key to recover the speed.
Press Stop key to stop the embroidery (Including the low speed idling and the
high speed idling).
VI. Manual Operation
Manual Thread-trimming ：
1.
(1) Flat Embroidery ：
When the machine stops, click
line processing.
(2) Special Embroidery
When the machine stops, click
prompt window, where user needs to click "Trim Upper&Bottom Thread" to trim
threads, or click "Trim Bottom Thread" to trim the bottom thread only. Clicking
Manual Frame-Moving ：
2.
When the machine stops, press the keys （
20
Chapter 2 Embroidery Guide
is to quit the thread-trimming operation.
Owner's Manual of BECS- 285A Computerized Control System
in the main interface, direct shear
in the main interface to activate the
, , ,
） to move