DAHAO BECS-285A Owner's Manual page 130

Chapter 11 About JF Sequin Embroidery
6 pieces of 3 & 7 overlap sequins, at last, use first needle to embroider 9mm sequins
Procedure of Setting:
(1)
① Click 9 to activate the interface for setting sequin-feeding mode;
② Click
③ Click "1", then click
④ Click
setting.
(2)
① Click 9 to activate the interface for setting sequin-feeding mode;
② Click
③ Click "1", then click
④ Click
(3)
① Click 9 to activate the interface for setting sequin-feeding mode;
② Click
③ Click "1", then click
④ Click
⑤ Click "1", then click
⑥ Click
(4)
① Click 9 to activate the interface for setting sequin-feeding mode;
120
or until "C" appears, then click
;
or until "End" appears, then click
or until "AB" appears, then click
;
or until "End" appears, then click
or until "B" appears, then click
;
or until "C" appears, then click
;
or until "End" appears, then click
;
;
Owner's Manual of BECS- 285A Computerized Control System
；
to finish the first
;
to finish the setting.
to finish the setting.