DAHAO BECS-285A Owner's Manual page 15

13 、 Brake Adjustment
User can adjust the parameter of brake to let the main shaft stop at the correct position
according to the characters of his own machines.
14 、 Save Start Point
This function can save the start point of each design, which waives the works of user for
searching the start point at embroidering the identical design.
15 、 Mechanical Maintaining and Debugging
This function is to easily judge the malfunctions at maintaining and testing, such as
encoder testing, main shaft speed testing, machine parts testing and the main shaft stopping at
any position, etc.
16 、 Multi-Language Support
Currently, the system supports the display in Chinese, English, Spanish and Turkish,
Russian, French and Portuguese.
17 、 Design Output
Design can be output and saved into floppy disk or USB disk. Adoption of TAJIMA's
binary system enjoys the advantage of data transmitting through the World Wide Web (other
formats may not be transmitted directly).
18 、 Repetition Embroidery
The user can increase embroidery productivity by using the function of repetition
embroidery, which can also be used with cyclic embroidery.
19 、 Cyclic Embroidery
With this function, the machine can automatically return to the origin point and start the
same embroidery again when finishing the design one time. The user also can increase
embroidery productivity rapidly by combining this function with the special design-making
function or repetition embroidery function.
20 、 Design Compiling
（ 1 ） Compiling the Data of Selected Design to Generate New Design
Users can compile any design according to zoom ratio, rotate angle, normal repetition or
partial repetition to generate a new design and save it in the memory card. The newly generated
design can be used for embroidering, output or other operations.
（ 2 ） Compiling the Combined Design
Owner's Manual of BECS- 285A Computerized Control System
Chapter 1 General Information
5