DAHAO BECS-285A Owner's Manual page 64

Chapter 6 Memory Design Management
No. Display
4
1. Click
interface.
2. Select a design in the memory design area of the memory design management
interface.
3. Click
preview interface.
4. Click
click
54
Name
Move up Move the design upwards
Acceleration Fasten the display of design
Move left Move the design leftward
Move down Move the design downward
Move right Move the design rightward
Draw/Pause
Switch
drawing design and pausing display
Single Step
Draw the design according to the single step
Display
Redraw Redisplay the selected design
Display the design in the actual size. So the
Actual Display size of the design on the screen is the actual
size of the design after embroidery.
Quit Quit the operation in design preview interface
Display the help menu of design preview
Help
interface
in the main interface to enter the memory design management
in the memory design interface to open the memory design
to control the size of the displayed design;
to control the position of the displayed design. Click
Owner's Manual of BECS- 285A Computerized Control System
Description
Shift the statuses between