DAHAO BECS-285A Owner's Manual page 27

⑦ Cancel Embroidery
I. Input Design
The user can input designs through network, floppy disk or USB disk. Only with
displayed （ successful registration ） , can it be possible to transmit designs by network. For disk
operation, （ USB disk included ） , you can inputting designs by choosing
management interface.
II. Select Design
If the design management interface is not opened, click
enter it. If the screen is opened but the current window stays at another function interface, press
the blue task switch key on the panel to enter the design management interface. Only in the
,
status can user be allowed to choose design for embroidery.
1. In the Design Management interface, click "
2. If the design's start point has been saved, the prompt "The start point of pattern is
Owner's Manual of BECS- 285A Computerized Control System
Chapter 2 Embroidery Guide
① Input Pattern
② Select
③ Assistant Operations
④ Confirm Embroidery
⑤ Start Embroidery
⑥ Manual Operation
i
n the main interface to
" to set the design for embroidery.
,
in the design
17