DAHAO BECS-285A Owner's Manual page 24

No. Display
4
14
Chapter 2 Embroidery Guide
Name
Manual
Color-changing
Manual Start
Auto
Color-changing
Manual Start
Auto
color-changing
Auto Start
Owner's Manual of BECS- 285A Computerized Control System
Description
stop key, the frame directly
moves to the actual position of
the current stitch count.
When the machine stops,
click this key to switch to the
normal embroidery status
In this status, select the needle
position with
Color-changing (
color-changing key) and press
start key for embroiery.
When encountering
color-changing code,
machine will stop automatically.
The figure appears, and the
system awaits the
color-changing order. At this
moment, user needs to perform
the manual color-changing
(Press or Color-changing
Key on panel). After the machine
turn to the needed
position, user can press the start
key for the embroidery (Manual
Start).
If the machine is set at Auto
Color-changing, user should set
the color-changing
advance (Click
setting).
When user presses the start key
for embroidery, no matter where
the current needle rod locates,
the machine will change the
needle according to the set
color-changing order
perform the embroidery.
When encountering
color-changing code,
machine will stop automatically
and shift to the pointed needle
position according to the auto
color-changing order. If the
Reference Page
.
Manual
or the
the
the
Chapter 2.4
manual
needle
Chapter 2.4
order in
for
Chapter 2.4
and
the
the