DAHAO BECS-285A Owner's Manual page 32

7. Back to Stop Point
Click in the main interface and choose
the frame will return to the stop point.
8. Positioned Idling
Use this function after embroidery confirmation. Positioned idling enables the machine to
move to the designated position without embroidering according to the user's requests. Click
and turn to next page. Then the user can set the needle number, color-changing code and
stop code for performing the positioned idling forward or backward.
9. Needle Stop at Down Position
This function is designed for quilt embroidery. Click
the "Needles Stop at Down Position", and select
and a prompt will appear. After releasing the cloth (please make sure that the cloth is separated
from the frame), user should move the frame to the designated position and click
After this operation, the needle is still at down position. When the cloth is placed on the frame
again, click to turn the main shaft to 100º manually.
10. Manual Operations of AFC, Sequin and Cording Embroidery
Some machines are equipped with devices for AFC, sequin and cording embroidery. For
22
Chapter 2 Embroidery Guide
Owner's Manual of BECS- 285A Computerized Control System
in the followed prompt. Then
in the main interface, press
. The needle will prick into the cloth
.