DAHAO BECS-285A Owner's Manual page 136

Chapter 12 Operation of Zigzag Embroidery
In the main interface, press the key
"1" is for zigzag embroidery, others are for non-zigzag embroideries. Press the number to
activate the corresponding needle position. Press to
embroidery mode of the current zigzag embroidery. Click that key to change the embroidery
mode. If user has nothing to change, please press
Definition of icons:
Normal Embroidery ；
Z4 Embroidery: The rod swings at each stitch.
Z5 Embroidery: The feature of it is same to Z4. It is suitable for the thick thread.
126
to enter into color-changing interface.
exit. The
to exit.
Owner's Manual of BECS- 285A Computerized Control System
indicates the